Doctor of Philosophy (PhD) in Physics - Nanotechnology

The program information below was valid for the fall 2016 term (September 1, 2016 - December 31, 2016). This is the archived version; the most up-to-date program information is available through the current Graduate Studies Academic Calendar.

The Graduate Studies Academic Calendar is updated 3 times per year, at the start of each academic term (January 1, May 1, September 1). Graduate Studies Academic Calendars from previous terms can be found in the archives.

• Admit term(s) 
  • Fall
  • Winter
  • Spring
• Delivery mode 
  • On-campus
• Program type 
  • Collaborative
  • Doctoral
  • Joint
  • Research
• Registration option(s) 
  • Full-time
  • Part-time
• Study option(s) 
  • Thesis

• Minimum requirements 
  • Normally a Master's degree in Physics, with at least a 75% standing.
• Application materials 
  • Graduate Record Examination (GRE) Physics subject test scores for all students who have completed their post-secondary education outside of Canada.
  • Supplementary information form
  • Transcript(s)
• References 
  • Number of references:  3
  • Type of references: 

    academic

• English language proficiency (ELP) (if applicable)

Thesis option:

Graduate Academic Integrity Module (Graduate AIM)

Courses 

• Students must complete 4 half credit courses (0.50 unit weight) including 2 required core courses, 1 elective course from the list of technical electives and PHYS 701 Quantum Mechanics 1. If, however, PHYS 701 has already been taken for MSc credit, PHYS 704 or PHYS 706 can be used as a substitute.
• Students admitted with an appropriate honours bachelor’s degree or who transfer directly from a masters program to the PhD program must complete 8 half credit courses (0.50 unit weight) including 2 required core courses, 5 elective courses from the list of technical electives and Physics 701 Quantum Mechanics 1.
• Courses taken during the MSc program, in excess of those required may be allowed for PhD credit. The extra courses must be identified prior to admission.
• Nanotechnology core courses:
  • NANO 701 Fundamentals of Nanotechnology
  • NANO 702 Nanotechnology Tools
• Core courses are designed to provide the base knowledge and skill set required to prepare students for more specialized courses and to conduct interdisciplinary nanoscale research.
• Students who have completed their Bachelor of Applied Science (BASc) degree in Nanotechnology Engineering at the University of Waterloo will not be required to take the 2 core courses. Instead, they can choose all graduate courses from the list of technical electives.
• 3 of the core courses, including 1 of PHYS 701, PHYS 704 or PHYS 706, or their equivalent must be taken by the completion of the first year of the PhD program. These courses may have been taken during the MSc program.
• Technical elective courses:
  • (a) Micro/nano Instruments and Devices
    • BIOL 642 Current topics in Biotechnology
    • CHEM 724 Chemical Instrumentation
    • CHEM 750 Topic 17 Selected Topics in Physical Chemistry: Surface Science and Nanotechnology
    • CHEM 750TXX Nanostructured Materials and Analysis
    • ME 738 Special Topics in Materials: Materials for NEMS and MEMS
    • ME 770 Topics in Heat and Fluid Flow: Micro- and Nano- fluidics
    • ME 780 Special Topics in Mechatronics: MEMS Design and Analysis
    • SYDE 682 Advanced MicroElectroMechanical Systems: Principles, Design & Fabrication
    • SYDE 750 Topic 24 Topics in Systems Modelling: Modelling, Simulation and Design of MEMS
  • (b) Nanoelectronics Design and Fabrication
    • CHEM 750 Topic 11 Selected Topics in Physical Chemistry: Bioelectronics
    • CHEM 750 Topic 19 Selected Topics in Physical Chemistry: Carbon Nanotube Electronics
    • ECE 631 Microelectronic Processing Technology
    • ECE 632 Photovoltaic Energy Conversion
    • ECE 633 Nanoelectronics
    • ECE 634 Organic Electronics
    • ECE 635 Fabrication in the Nanoscale: Principles, Technology, & Applications
    • ECE 636 Advanced Analog Integrated Circuits
    • ECE 637 Digital Integrated Circuits
    • ECE 639 Characteristics & Applications of Amorphous Silicon
    • ECE 672 Optoelectronic Devices
    • ECE 676 Quantum Info Processing Devices
    • ECE 677 Quantum Electronics & Photonics
    • ECE 730 Topic 10 Special Topics in Solid State Devices: Advanced Technology for Semiconductor Processing
    • ECE 730 Topic 11 Special Topics in Solid State Devices: Physics and Modeling of Semiconductor Devices
    • ECE 730 Topic 19 Special Topics in Solid State Devices: Magnetism and Spintronics
    • ECE 730T20 Topics in Solid State Devices: Physics of Nanodevices
    • ECE 770T13 Topics in Antenna and Microwave Theory: Quantum Information Devices
    • ME 595 Introduction to MEMS Fabrication
    • ME 596 Topics in Nanotechnology: Introduction to Fabrication & Characterization of Nano-structures
    • PHYS 713 Molecular Physics
    • PHYS 731 Solid State Physics 1
    • PHYS 747 Optical Electronics
  • (c) Nano-biosystems
    • BIOL 608 Advanced Molecular Genetics
    • BIOL 614 Bioinformatics Tools and Techniques
    • BIOL 629 Cell Growth and Differentiation
    • BIOL 642 Current Topics in Biotechnology
    • BIOL 670 Photobiology
    • BIOL 678 Current topics in Neurophysiology
    • CHE 562 Advanced Bioprocess Engineering
    • CHE 660 Principles of Biochemical Engineering
    • CHE 661 Advances in Biochemical Engineering
    • CHE 760 Special Topics in Biochemical Engineering
    • CHE 765 Research Topics in Biochemical Engineering
    • CHEM 730 Proteins and Nucleic Acids
    • CHEM 731T02 Physical Biochemistry
    • CHEM 737 Enzymes
    • PHYS 751 Clinical Applications of Physics in Medicine
    • PHYS 752 Molecular Biophysics
  • (d) Nanomaterials
    • CHE 541 Introduction to Polymer Science and Properties
    • CHE 542 Polymerization and Polymer Properties
    • CHE 612 Interfacial Phenomena
    • CHE 622 Statistics in Engineering
    • CHE 640 Principles of Polymer Science (cross-listed with CHEM 770)
    • CHE 641 Physical Properties of Polymers (cross-listed with CHEM 771)
    • CHE 740 Special Topics in Polymer Science and Engineering
    • CHE 745 Research Topics in Polymer Science and Engineering
    • CHE 750 Special Topics in Materials Science: Thin Film Fabrications & Mechanical Properties
    • CHE 755 Research Topics in Electrochemical Engineering, Interfacial Engineering & Material Science
    • CHEM 710T12 Structure and Function of Supramolecular Materials
    • CHEM 710T15 Advanced Solid State Chemistry: Ion, Electron and Molecular Transport
    • CHEM 710 Topic 17 Selected Topics in Inorganic Chemistry: Nanostructured Materials and Integrative Chemistry
    • CHEM 713 Chemistry of Inorganic Solid State Materials
    • CHEM 750 Topic 17 Selected Topics in Physical Chemistry: Surface Science and Nanotechnology
    • ME 632 Experimental Methods in Materials Engineering
    • ME 738 Special Topics in Materials: Materials for NEMS and MEMS
    • ME 738 Topics in Materials Science: Nanostructured and Amorphous Materials
    • ME 738 Topic 8 Special Topics in Materials: Introductory and Advanced Nanomechanics
    • PHYS 701 Quantum Mechanics 1
    • PHYS 704 Statistical Physics 1
    • PHYS 706 Electromagnetic Theory
    • PHYS 773 Special Topics
• No undergraduate course in Physics may be taken for credit.
• An average of at least 70% must be obtained in the required courses. A minimum grade of 65% is required for a pass in each course. No more than 2 courses, of the first 4 taken, can have averages of less than 70%. If a student does not meet these minimum grade requirements, or receives a failing grade in any course, the student may be required to withdraw from the program.
• In exceptional circumstances course requirements may be waived with the approval of the Guelph Waterloo Physics Institute Director, Physics and Astronomy Graduate Officer, and Associate Dean of Science for Graduate Studies.

Link(s) to courses: for information about these courses, please contact Graduate Studies and Postdoctoral Affairs

• Physics (PHYS) courses
• Nanotechnology (NANO) courses
• Biology (BIOL) courses
• Chemical Engineering (CHE) courses
• Chemistry (CHEM) courses
• Electrical and Computer Engineering (ECE) courses
• Mechanical and Mechatronics Engineering (ME) courses
• Systems Design Engineering (SYDE) courses

Academic Integrity Workshop

• This is a milestone requirement for all full-time students. Part-time students are not required to complete this workshop. This is a mandatory workshop on academic integrity and intellectual property which will be offered to all new incoming graduate students within the Faculty of Science during the first term of each Fall and Winter.
• Note: students will be required to complete both the Academic Integrity Module as a required course along with the Academic Integrity Workshop milestone. The Module will appear on the student's transcript as a course. The Workshop will appear on the student's transcript as a milestone.

Nanotechnology Seminar

• This Nanotechnology Seminar is a forum for student presentation of research results or proposals. Invited speakers from academia and industry will also present results of research from time to time. The range of topics that will be addressed in the seminar crosses all areas of research in the collaborative program. Each student is required to present at least one research seminar. To receive credit, students are required to attend at least eight seminars other than their own before completing their program.
• The seminar is graded on a Credit/Non-Credit basis.

PhD Comprehensive Examination

• The student will be required to take a Qualifying Examination (QE). The QE should be held as early as possible but no later than the end of term six of the doctoral program (term seven for transfer students). The examination will assess the student's knowledge of the fundamentals and applications of the physics closely related to the thesis topic. An assessment of the student's ability in research will be a factor in determining the examination result. If a student has not passed the QE by the end of the sixth term in which they are enrolled, they may be required to withdraw from the program.

PhD Thesis

• An acceptable thesis on an advanced research topic must be submitted. The topic of the thesis and the quality of the research will be such as to merit publication in reputable scholarly media. Detailed specifications of the format of the thesis are available from the appropriate Graduate Office.
• Acceptance of the thesis requires satisfactory completion of a Final Oral Examination.

Other requirements 

• Supervisory Committee meetings: it is required that the student meet formally with their Supervisory Committee within the first six months of registration. Subsequently, the supervisory committee is expected to meet with the student at least twice per year. While one meeting in a year must be a formal one, the other meeting may be held informally. In the former case, the student is expected to provide a written report to the Committee and defend it orally. In the latter case, the meeting may simply take the form of a brief discussion of the student's academic progress but, apart from the student and supervisor, it must involve at least one other member of the Committee. The student will be required to take a Qualifying Examination, normally during the first year of the program; in any case, it must be passed no later than the final semester of the residency requirement. The examination will ascertain the student's knowledge of the fundamentals and applications of the physics closely related to the thesis topic. An assessment of the student's ability in research will be a factor in determining the examination result.